Fiberglass mesh tape

1. Strong Fiberglass Mesh Strengthens Joints
2. Mesh Design Eliminates Bubbles and Blisters
3. Good performance of alkaline-resistance
4. High tensile strength and deformation-resistance
5. Excellent self-adhesive performance
6. Full Assortment of Roll Sizes, Styles, and Colors
7. For Use With Setting-Type Joint Compounds and Plaster
8. No need to apply primer in advance, quick to use and easy to apply

1. Keep it clean and dry.
2. Put tape on the cracks and press tightly.
3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally brush with mortar.
4. Let it air dry, then lightly sand.
5. Fill enough paint to make the surface smooth.
6. Cut off the leaking tape. Then, pay attention that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding area of the joints to make it as clean as new.

Each roll wrapped up in shrink film and then packed in a cardboard box. The carton are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.