Fiberglass chopped strand mat
PRODUCTS
Fiberglass Chopped Strand Mat
- Chopped strand mat is made of randomly dispersed strands with power or emulsion bonded.
- Applicable for hand lay-up, continuous lamination process. Compatible with UP， VE.
- Suitable for transparent panels, ship bodies, automobile parts, interior decorations, etc.
FIBERGLASS CHOPPED STRAND MAT
- Consistent thickness and stiffness.
- Rapid impregnating and good compatibility with resin.
- Superior wet through with less air trap.
- Good mechanical properties and high strength of parts.
The Usage of EMC 450g Fiberglass Chopped Strand Mat for epoxy resin
- Automobile accessories
- Plumbing fittings
- Chemical anticorrosive pipeline
- Cooling tower basin
- Boats and ships
- Building
- Furniture
It’s mainly used in hand lay-up, filament winding and compression molding processes. The typical FRP products are panels, tanks, boats, complete set of sanitary equipment, automotive parts, cooling towers, pipes etc.
Uniform thickness, softness and hardness good.
Each roll is packed in a polyester bag and then put into a cardboard box or plastic woven bag. The weight of each roll is between 20~85 kg. The rolls are to be horizontally placed and could be in bulk or on a pallet. Optimum storage conditions are between the temperature of 5～35℃ and the humidity between 35%～65%. The product should be used within 12 months from the time of delivery and remain in its original packaging until just before use.
| Specification Chopped strand mat | |||||||
|---|---|---|---|---|---|---|---|
| Style | Mass (g/㎡) | Tensile Strength (N/50mm) | Combustible Matter Content | Width (cm) | Wet-out Rate (s) | Moisture Content |
|
| Longitudinal | Transverse | ||||||
| EMC100 | 100±22 | ≥ 30 | ≥ 30 | 1.8%～8.5% | 1040/1270 | ≤ 40 | ≤ 0.20% |
| EMC200 | 200±22 | ≥ 40 | ≥ 40 | 1.8%～8.5% | 1040/1270 | ≤ 60 | ≤ 0.20% |
| EMC225 | 225±22 | ≥ 40 | ≥ 40 | 1.8%～8.5% | 1040/1270 | ≤ 60 | ≤ 0.20% |
| EMC300 | 300±22 | ≥ 60 | ≥ 60 | 1.8%～8.5% | 1040/1270 | ≤ 80 | ≤ 0.20% |
| EMC375 | 375±20 | ≥ 60 | ≥ 60 | 1.8%～8.5% | 1040/1270 | ≤ 80 | ≤ 0.20% |
| EMC450 | 450±20 | ≥ 80 | ≥ 80 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.20% |
| EMC600 | 600±18 | ≥ 80 | ≥ 80 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.20% |
| EMCL300 | 300±22 | ≥ 60 | ≥ 60 | 1.8%～8.5% | 1040/1270 | ≤ 80 | ≤ 0.50% |
| EMCL450 | 450±20 | ≥ 80 | ≥ 80 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.50% |
| EMCL600 | 600±18 | ≥ 80 | ≥ 80 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.50% |
| CMC300 | 300±22 | ≥ 60 | ≥ 60 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.20% |
| CMC450 | 450±20 | ≥ 80 | ≥ 80 | 1.8%～8.5% | 1040/1270 | ≤ 100 | ≤ 0.20% |
| ●Nonstandard product is available upon the customer’s request. This data is for reference only. | |||||||